14-day returns under your statutory cancellation rights. Returns policy
Secure checkout powered by Stripe.
About this product
Lindy 70m Cat.6A HDMI 4K60 & Type C HDBaseT 3.0 KVM Extender, 3840 x 2160 pixels, AV transmitter & receiver, 70 m, Wired, Black, HDCP
The Lindy Cat.6A HDMI® 4K60 & Type C HDBaseT 3.0 KVM Extender is a high performance, reliable solution for extending AV and data signals over long distances via Cat.6A network cable.
The following distance and resolution combinations are possible when using high quality Cat.6A or above U/UTP or F/UTP cable: 40m: 3840x2160@60Hz 4:4:4 8bit / 4:2:2 12bit 70m: 3840x2160@30Hz 4:4:4 8bit / 4:2:2 12bit
Supporting uncompressed resolutions up to 4K Ultra HD, video can be viewed in stunning clarity, while additional support for HDR (High Dynamic Range) allows content to be displayed with enhanced brightness, greater contrasts of blacks and whites and a much wider colour gamut. 4K to 1080p downscaling function is also supported on HDMI output.
The user can connect a Type C or HDMI® (with USB) input port in order to control any source such as a PC or Laptop, the Type C port supports also 60W power delivery provided directly from the Transmitter just connecting the included power supply. Switching between the 2 inputs is possible pushing the button on the transmitter unit, auto switch feature is also supported.
PoC (Power over Cable) functionality with On/Off switch provides additional flexibility. This allows power to be supplied alongside data through Cat.6A network cable in a point to point connection between the transmitter and receiver, meaning only a single power supply is required at one side of the installation.
Featuring 3.5mm Analog Audio outputs with de-embedding function to connect speakers or amplifier on both units, EDID DIP switch with presets and copy function on the transmitter. Bi-directional IR ports at both sides of the setup, the source equipment can be easily controlled from the display side, and the display can also be controlled from the HDMI source side. This extennder allows for complete control for the user providing APIs over RS-232 or USB Micro B ports.
HDBaset is a globally recognised standard for high quality distribution of AV content and other technologies, including power and control, over longer distances via low cost Cat.6 or above cable.
HDBaseT Trade Mark and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
Please Note: the quoted lengths and resolutions are possible with a direct connection between Transmitter and Receiver using good quality Cat.6A or above cable. Using a different cable type, introducing couplers or patch panels may result in a reduction of possible distances.
Full specification
54 specifications
Certification
CE, UKCA, FCC, RoHS, REACH & California Proposition 65
HDBaseT certified
Yes
Product colour
Black
Material
Metal
Bandwidth
18 Gbit/s
HDCP
Yes
HDCP version
2.2
Infrared (IR) frequency range
20 - 60 kHz
CEC pass-through
Yes
Extended display identification data (EDID)
Yes
EDID management
Yes
Maximum refresh rate
60 Hz
Chipset
VS300R
Maximum transfer distance
70 m
Cable types supported
Cat6a
Maximum resolution
3840 x 2160 pixels
Type
AV transmitter & receiver
Operating relative humidity (H-H)
20 - 90%
Storage temperature (T-T)
-20 - 60 °C
Operating temperature (T-T)
0 - 40 °C
Storage relative humidity (H-H)
20 - 90%
DC-in jack
Yes
Remote (IR) input
1
3.5 mm (1/8-inch) in
Yes
3.5 mm (1/8-inch) out
Yes
Digital audio optical out
3
Digital audio optical output type
TOSLINK
RS-232 input ports
1
USB connector type
Micro-USB A, USB Type-A
USB version
2.0
HDMI version
2.0
Number of HDMI outputs
1
HDBaseT port
Yes
RJ-45 output ports
1
RJ-45 input ports
1
Connectivity technology
Wired
Output current
3.75 A
Operating voltage
24 V
Power source type
DC
Compliance certificates
CE, Federal Communications Commission (FCC), REACH, RoHS, UKCA
Transmitter dimensions (WxDxH)
170 x 102 x 22 mm
Receiver dimensions (WxDxH)
144 x 78 x 23 mm
Weight
1.9 kg
Packaging content
Transmitter, Receiver, Multi-country Power Supply (UK, EU, US & AUS), IR Emitter Cable, 1.5m, IR Receiver Cable, 1.5m, 4 x Mounting Ears & 8 x Screws, 2x 3-Pin Terminal Block, Lindy Manual
Mounting brackets included
Yes
Manual
Yes
Cables included
DC, IR
AC adapter included
Yes
Package type
Box
Package weight
2.18 kg
Package height
220 mm
Package depth
75 mm
Package width
290 mm
Quantity per pack
1 pc(s)
Features
Certification
CE, UKCA, FCC, RoHS, REACH & California Proposition 65